Kluber has been recognized more often perhaps, in the market of greases and oils but is definitely expanding its corporate presence in the field of fluoropolymer and MOS2 functional coatings. At Coating Systems, we really enjoy the new options that Kluber provides and so do our customers. Our Kluber products at Coating Systems have coatings for all substrates and the applications are endless: Axles, Springs, Pistons, Bolts, Chain Pins, Rubber Seals, Sealing Rings, Links, Rubber Gaskets, Sliding Guides, Clamps, Pins, Guide Axles, Armatures, Valves, Guide Tubes, Camshafts, and Shafts.
At Coating Systems, we inventory most of the following Kluber coatings:
Bulk Coatings:
Single Substrate Coatings:
- Klubertop TP 15–810
- Klubertop TP 03–111
- Klubertop TP 39 N A/B
- Klubertop TG 05 N
- Klubertop TP 38–901
- Unimoly C 220
Specifications:
Klubertop TP 03-111
Product Description:
Klübertop TP 03-111 is a thermosetting, black bonded coating with a polytetrafluoroethylene (PTFE) base and an organic binding agent. Klübertop TP 03-111 is a fluid, ready-to-use product containing an inflammable mixture of solvents (previously A II group). Once applied and hardened, this coating has a low friction coefficient, shows no stick-slip at low speeds, has a long service life, is very resistant to wear, chemicals and oils, and shows excellent anticorrosion properties.
Benefits for your application
Cost savings due to lifetime lubrication and anticorrosive effect
- Effective wear protection at oscillating motion
- No Re-lubrication required
- Effective combination of anticorrosive effect and reduced friction
Cost savings during processing
- Cost-efficient mass coating of small parts
- Reduction of worksteps due to good wetting, good surface covering
- Low volumes due to high yield
Higher component performance
- Due to very low friction coefficient
- Impedes tribo-corrosion
- Excellent resistance to chemicals and oils
[hr]
Unimoly C 220 (air dry), High Load
Product description
UNIMOLY C 220 is a hygro-setting grey bonded coating with a MoS2 base (molybdenum disulfide) and an inorganic binding agent. UNIMOLY C 220 is a fluid, ready-to-use product containing a mixture of flammable solvents. Once applied and hardened, the bondec coating is very resistant to pressure and has a wide temperature range. Owing to its structure, UNIMOLY C 220 is particularly suitable for high-vacuum applications. Adhesion is very good on special steel, metal and electroplated surfaces.
Benefits for your application
- Hygrosetting at room temperature
- Suitable for high pressures
- Resistant to low and high temperatures
- Suitable for vacuum applications
- Excellent adhesion on metals
- Suitable for materials susceptible to cold welding, e.g. special steel nuts and bolts
- Well-proven as an assembly aid
- Improves the running-in process
- Prevents stick-slip
[hr]
Klubertop ™ 06–111
Product description
Klübertop TM 06-111 is a thermosetting, grey-black bonded coating based on molybdenum disulphide (MoS2) and an organic binding agent. Klübertop TM 06-111 is a fluid, ready-to-use product containing a flammable mixture of solvents (previously VbF AII group).
Benefits for your application
- Cost savings due to wear and corrosion protection also under high loads
- Long component life due to good surface smoothening at high loads
- Highly resistant at high loads in combination with corrosive influences
- Low friction coefficients at high loads
- Clean and dry surfaces with lubricating effect
- No contamination by fluid lubricant
- No sticking of lubricated components during automated assembly
- Lubricant firmly incorporated, no risk of lubrication starvation in the friction point
[hr]
Klubertop TP 15–810
Product description
Klübertop TP 15-810 is a black air-drying bonded coating based on polytetrafluoroethylene (PTFE) and an organic water-miscible binder. Klübertop TP 15-810 is a fluid, ready-to-use and non-flammable product. Once applied and hardened, this bonded coating dries rapidly and ensures good resistance to wear and chemicals, a low friction coefficient, no stick-slip at low speeds and good corrosion protection on phosphated surfaces. Its resistance to oils and greases is good.
Benefits for your application
Clean, dry wear protection
- Lifetime wear protection firmly ‘rooted’ in the surface
- No contamination by fluid lubricant
- No sticking during automated assembly
Lower costs and less space required during processing
- Klübertop TP 15-810 is water-miscible and requires no VOC filter system
- Cost-efficient mass coating of small parts
- Fast air-drying – no heat setting required
Higher component performance
- Very low friction coefficient
- No stick-slip
- Delayed tribocorrosion
- Good corrosion protection on phosphatized substrates
[hr]
Klubertop TP 39 N A/B
Product description
Klübertop TP 39 N A/B is a thermosetting, black-coloured high-performance bonded coating made up of two component parts. It has an organic binder containing PTFE as the solid lubricant.
Benefits for your application
Long component life expectancy
- Wide service temperature range
- In combination with oils or greases
- Highly flexible bonded coating
- Coatings of up to 70 µm thickness can be applied
Better component performance
- Less stick-slip
- Very high wear resistance
- Lifetime lubrication is possible
[hr]
Klubertop TG 05 N
Product description
Klübertop TG 05 N is a thermo-setting, grey-black bonded coating based on graphite and an organic binding agent. It is a fluid, ready-to-use product containing a highly flammable mixture of solvents (former hazard class VbF A II). Once applied and hardened, the coating forms a dry lubricant layer which has a very wide service temperature range and a low friction coefficient, ensures that there is no stick slip at low speeds, has a long service life and is very resistant to wear. In addition, this product has an excellent resistance to oil, and a good resistance to chemicals. It also provides good corrosion protection on phosphate surfaces.
Benefits for your application
- Bonded graphite coating for metal components
- Wide service temperature range
- Efficient lubricating capacity in humid environments
- Suitable in context with oil lubrication
- Long service life, good wear resistance
- Good resistance to chemicals and oil
- Low friction coefficient
[hr]
Klubertop TP 38–901
Product description
Klübertop TP 38-901 is a water-miscible, thermosetting, single-component bonded coating for the food-processing, drinking water and pharmaceutical industries.
Benefits for your application
Suitable for the food-processing, drinking water and pharmaceutical industries
- The product is NSF-H1 registered and meets the EU regulations pertaining to food grade products.
- Drinking water approval according to DVGW worksheet W 270
- Complies with the requirements for organic coatings in drinking water applications
Hygienic and dry compared to oil/grease lubrication
- No contamination with oil or grease
- Sealing rings and other elements are prevented from sticking together during automatic feeding
- No VOC filter required since the product is water-miscible
Cost-saving and efficient compared to lubricant-free procedures
- Reduction of assembly forces by up to 40 % enables clean and easy assembly
- Shorter downtimes and increased production volumes possible due to low friction coefficients
Easy handling of small mass-produced parts
Contact Coating Systems to Learn More About Our Kluber Products
If you have any additional questions about our Kluber products, feel free to contact one of our staff members at Coating Systems. We can be reached by phone at 1–800-593-7754. If Kluber lubrication isn’t exactly what you need, ask us about our other services such as dip spin coating, rubber or-rings, industrial painting and more.
